The patented AXEO Streukonzept „ CDA \ " consists of the agitator, the throw disk with eight throw wings and the proportioning slide opening. CDA stands thereby for Coaxiale – for dosage and adjustment of point of task. The particularly formed dosing opening and a special Schieberform were derived from the AXIS Mineraldüngerstreuern. In the year 2005 the DLG distinguished on the AGRITECHNICA this development with silver medal. To the improved strewing accuracy the mix-stable strewing picture makes the largest contribution. The mass flow is dependent of the driving speed, the spread and the strewing quantity per m ². By the special Schieberform succeeded eliminating so the influence from changing driving speeds and different work widths to. The strewing picture of the AXEO has an even, sharply defined, trapezoidal form with relatively small losses at the roadside with each mass flow of maximally 3%. However can be saved by a better lateral distribution in such a way up to 30 - 50% grit. A genuine highlight is the possibility of steering the AXEO scatterers electronically with on-board computer QUANTRON k. As basis on-board computer worked satisfactorily with the thousandfold sold AXIS manure distributors serves QUANTRON e. The QUANTRON k has in the AXEO the following functions: • an opening and the slidegate valve by push of a button • mass flow regulation in dependence of the driving speed • control of the spread delimitation for different work widths with automatic mass flow regulation as a function of the spread • documentation with the yielded quantity, the worked time and the strewn distance • comfortable announcements close like for example the still possible strew-strain or warning references concerning residues in the container. The AXEO Rührwerkskonzept is basis for a powerful, efficient winter services employment with small secondary and repair times. It consists of two parts: The lower part orders over two wear resistant, flexible plastic fingers, which let flow out evenly the thawing salt keep free with small dosing quantities the slidegate valve opening and. The top consists of an agitating staff. With full container this sets up itself in the center. After running out container puts on itself the agitating staff at the race, shifts themselves thereby and brings knocking forces on the container wall to the effect. Grit also bad-flowing follows in such a way after, without it comes to wear of the container walls.

With the introduction of the Ecodaily the transporter offer is adapted starting from October of this yearly to the obligatory exhaust standards of the European Union by Iveco on the one hand, supplemented on the other hand around new engine variants. Beside the well-known models with 3,2 to 6,5& t of permissible total mass (zGM) becomes it in the future this light truck also with 7,0& t zGM give. With it around 470& kg on maximally 4,7& t increased pay load advanced the transporter of Iveco into regions, which were reserved so far the traditional 7,5-Tonner. Outwardly the new Iveco transporter essentially differs by a changed radiator grille. The instrument panel was arranged completely new.
As before there is that DAILY one with two engine series. There is the 2,3-l-Vierzylinder as before with 71, 85 and 100& KW (96, 116 and 136& HP) Achievement. In addition achievement variants with 78 and 93&amp come; KW (106 and 126& HP). Iveco offers the 3,0-l-Motor as before with 107 and 130& KW (146 and 176& HP) on. All these engines still correspond to the exhaust standard euro 4, which &quot for vehicles with one „ reference weight \; of maximally 2.840& kg still until 2012 for the first time certified vehicles is permitted. „ reference weight \ " means unloaded weight of the vehicle without drivers plus 75 kg (&quot for „ the standard driver \;) plus additionally 100 kg up to altogether 2.610& kg (on 2.840& kg on request of the manufacturer expandable).
Ecodaily: Euro-5/EEV, CNG and „ a zero emission \ " Vehicle also electric drive for the new Ecodaily offers four drives to Iveco: a new 3,0-l-Motor in the performance levels 103 and 125& KW (140 and 170& HP), the proven 3,0-l-CNG-Motor with 100& KW (136& HP) and purely an electric drive. All these drives correspond to the guideline euro 5 and/or EEV.
The new 3,0-l-Dieselmotor has two-stage turbocharger, recycling of exhaust gases and Diesel particle filter. The vehicles with CNG engine receive a small gasoline tank, which permits it to start if need be surely and in any case the next natural gas gas station. Engine performance becomes thereby from 100 KW (136 HP) on 60& KW (82& HP) reduces.
The electric drive becomes for the models 35 S (einzelbereifte box cars, combination and plank bed cars) as well as 50 C (box and plank bed cars with dual-tire rear axle) offered. The three-phase synchronous engine is steered over a direct current/an alternating current inverter and by NaNiCl2 batteries (Zebra system) with a rated voltage of 278& V with river supplies. The gas densities batteries need no maintenance and are completely recycelbar. Within eight hours they become at a three-phase plug socket (380& V/32& A) loaded.
The electrical Ecodaily is, depending upon version and required range, with two to four modular batteries (four batteries only equipped with the version 50 C) and a rekuperativen brake system. This loads the batteries during braking over two stages and increases so the range. The electrical Ecodaily reached load and operationally depending upon number of the installed batteries and the topography at a maximum speed of 70& km/h ranges between 90 and 130& km in the stop and go mode. That is far more than the typical average daily performance in distributor traffic in the city with many starts and stops. The weight of the batteries was in the past the largest problem for electrical claimant vehicles. With the electrical Ecodaily Iveco developed vehicle, which is heavier with two batteries only 300 kg than the appropriate Diesel version.
There are two engine versions: 30 KW of rated output (60 KW of maximum performance) for the model 35 S (3,5& t zGM) and 40 KW of rated output (80 KW of maximum performance) for the model 50 C (5,2& t& zGM). In the instrument carrier a display is installed, which supplies the necessary information for the correct trip with the vehicle to the driver with: Charge, tension, battery temperature, river of the batteries and data concerning the driving conditions of the electrical drive system.
The vehicle is driven similarly as a vehicle with automatic transmission, as the courses with a lever are inserted: D = drive, N = neutral and R = reverse gear. The speed control is steered by the drive inverter via the manipulation of gas and brake pedal and regarding the current driving conditions. The electrical DAILY one can with fully used total mass upward gradients to 18& % concern. The maximum speed is electronic in favor of higher assignments with 70& km/h abgeregelt. The vehicle adapts perfectly to the normal driving and duty cycles in city traffic. For the very good acceleration values a characteristic in principle of the electric motors provides: They produce their maximum torque when starting.
Security, comfort and all DAILY one and Ecodaily have in series ESP, ABS, ASR, HBA and Hill Holder. The system LAC registers mass and emphasis changes of the vehicle in the longitudinal axis and adapts the safety systems dynamically. In this way braking and stability are altogether improved: Not only the risk of lateral tilting is reduced, but also the wear of the brakes is distributed evenly by the cooperation of the systems, which extends the interval between the surface changes altogether. The instrument panel was revised in materials and colors thoroughly and contains beside new control elements with the CNG models now also a similar announcement for natural gas supply with integrated control lights for contents of the small gasoline tank.
The numerous files in the driving cab were again arranged. Additionally to the subjects in the doors, the instrument panel and in the roof sky the vehicle under the optional passenger seat bank possesses a shelf with a capacity of six litres.
New mini bus variants of iris bus on the basis of the Ecodaily iris bus offers to Iveco new mini bus variants: the Citis for city traffic, the Recreo as school bus, the Way for trip traffic and the Tourys for the range tourism. Everything these mini buses propelled from the strong, EEV homologierten 3,0-l-Motor.

The Genialität of this new combat machine against game herb is not limited however only to the ecology. The agility of the game herb brush is simply fantastisch, it arrived at places, to which you approached with past attachments never ever. Always and everywhere those game herb brush is in front mobile at the EGHOLM 2200 cultivated and nevertheless perfectly. It can be moved fully hydraulic in all directions, can from a side on the other side be swivelled and scratches over the entire width the game herb away. Before game herb can prosper at all, the Keimlinge are already fought. The Keimlinge are prevented to strike roots whereby a preventive effect is obtained. With regular employment of the game herb brush fastened surfaces can be kept perfectly free over the entire growth period of game herb. Precise SteuerungUnd without any physical effort. The game herb brush is as flexibly and stably built as no different one that makes the precise control the children’s game. The entire control runs over a Joystick in the operator’s cab. The game herb brush is applicable both on horizontal and senkrechten and diagonal surfaces. It arrives approximately around obstacles. Ideally for large surfaces just like for the cleaning of perpendicular walls and the edgings, it arrived into the gaps between tilings and paving, packs the game herb at the roots and cleans also problem-free ranges around lantern masts and trees. The purest pleasure – and in each regard a clean solution. The game herb brush is equipped with a screen, so that game herb and waste are not scattered in all directions. The suitable type of brush for everyone need for the respective task can be selected between two brush heads. The one possesses flat wire brushes. It is particularly suitable for sensitive surfaces, which must to be cleaned regularly of game herb in the gaps and none to hard procedure permit. The other one orders both over wire brushes and over rigid Stahlzöpfe. It is super+strong and as production for the rough work, if the game herb already saw over longer time no game herb brush and out-rampantly grows. The exchange of the brushes is completely simple also with equipment attached at the EGHOLM 2200. Nothing will lie-let-lying lie-let-letting those game herb brush can also with a Saugmund be equipped and with the turning property container of the turning and the suction equipment be combined and clears up practical-proves directly behind itself. Keimlinge, seeds and loose game herb are sucked simply into the container. The screen promotes the waste directly before the Saugmund. The game herb brush does not leave anything. Only that no more game herb is to be seen, it betrays that the game herb brush must have been here. Installation and removal of the Saugmundes and the screen function completely without tool pollution free and future nobody doubt more to it that we approach to times, in which the requirements to environmental protection become constantly higher. The effects of poisons and waste materials on the environment move increasing in the consciousness of the entire world population. This shows up again in it that ever more global guidelines regulate, which materials we into nature escape let may and above all which not. Also on regional level ever extensive resolutions meet more municipalities to environmental protection. Therefore the requirement of the reason reads, to ahead-think how the game herb brush. This equipment is and works absolutely in an environmentally friendly manner and to also future, intensified environmental regulations will correspond. We call that. The superiority of the game herb brush of Egholm expresses itself not only in the efficiency, but also to it, how simple installation and removal are. It is equipped with an automatic stand, because EGHOLMs slogan reads not in vain: Easy of does it!

With a selector switch the user between ISO excavator price increase and ISO compact loader price increase can change. With a maximum driving speed of 10 km/h the Mecalac 8MCR settles its work on the building site fast and effectively. With the standard Mecalac - quick-change units can be changed the attachments simply and time-saving. The Mecalac 8MCR is at present most compact excavator in the 5 - to 8-Tonnen category. The tail swiveling radius is extremely short with 1,25 m. Thus the user has the possibility of working within spatially limited ranges e.g. in close lanes, on footpaths, in ways and roads with traffic. The Mecalac 8MCR has a cladding circle with 180° of only 2.66 m.Durch the singular Mecalac kinetics can the operator also closely on the machine work. With a range of up to 6,70 m and a max. grave depth of 3,70 m the user has an enormous range of action and must its work not by frequent shifting of the machine interrupt. The Mecalac 8MCR has a three-part adjustment arm with side disalignment. The entire arm can be adjusted for 2.03 m by 140° and be shifted to the right around 1,63 m to the left and/or from the machine center. Thus e.g. digging of ditches over a guard rail or a wall is away possible. The adjustment arm can be served by the patented cylinder coupling only with the Joystick without use of foot pedals. The 8MCR can be used by the versatile Mecalac arm in the dredging also as loaders, stackers and tool carriers. The advantage in the enterprise with loader bucket is in the enormous dumping height of up to 4,80 M. with the enterprise with pallet fork is possible a vertical lift of up to 5,18 m. At present are more than 10 different attachments available, e.g. Backacter dipper, ditch clearing spoon, grip arm, hydraulic hammer, Reißzahn, shovels, pallet fork as well as tool adapter for further attachments. With the Mecalac 8MCR the shovel is supported when the loading procedure and planing by the sign. Thus the full thrust is transferred by the equipment to the loader bucket. No loads in the arm develop. Also in the compact loader enterprise the 8MCR can turn the revolving platform around 360°. That means a substantial advantage over a standard compact loader. A majority of the driving procedures is avoided and the damage of the ground as well as the rubber chain is minimized. Due to the substantially larger dumping height of 3,50 m and vertical lift of 4,50 m the Mecalac 8MCR is to be clearly more versatile used. Owing to its range e.g. even unloading of a truck with pallets from the second row is possible or however a substantially better distribution of the bulk material on the truck with the loader bucket. For the productivity increase an automatic adjusting parallel guide is optionally available. As attachments e.g. are. Loader bucket, Skidschaufel, 4 in 1-Schaufel and pallet fork available. The operation in the two modes of operation ISO excavator price increase and ISO compact loader price increase is extremely simple and succeeds immediately. Additionally the control comfort was continued to increase by some functions summarized on the control levers. The very comfortable cab has an excellent all-round visibility. The windshield is completely raisable. A versatile adjustable comfort seat and also during strong sun exposure and under weak lighting conditions distinguished readable display make the daily work comfortable and safe. The Mecalac 8MCR replaces 2 machines on the building site. Thus only one machine must be transported to the building site. On the building site by only one machine less fuel is used and emitted fewer pollutants. Beyond that the enterprise of several conventional devices means a Unterbeanspruchung of each individual quietly standing equipment, which makes again the building site necessary unclearly and unnecessary as well as the environment loading movements. The Mecalac 8MCR is characterised by innovation, creativity, particularly pronounced alignment and comfort. honours year by year a selection of the best conversions, which came out from co-operation between enterprises and designers. The Mecalac 8MCR was distinguished with a star of the Observeur you Design 2009. The following criteria were decisive for the Prämierung: Innovation, improvement of the comfort, reduction of costs, adjustment to new needs, conversion of a global corporate strategy and investment to a new range. The Mecalac 8MCR was distinguished due to its completely new machine concept, which unites the characteristics of a seven-ton excavator with engine and attachments on the revolving platform with those of a fast compact loader on a dreieckförmigen chain drive assembly, in the context of the Neuheitenprämierung to demo park with the gold medal.

The Easy drive – electronic speed adjustment pre and backwards functioned with an electrical cylinder that the speed at the pump changes. Over whipping aster the speed pre and is backwards steered. When releasing the printing clutch (engine continues to run, the PTO drive and the speed adjustment uncoupled) the cylinder drives an LED lamp into is automatically the cylinder in central position shines green and signals to the operator the stop position. When pressing the additionally installed push-button at the position of the rocker switch the cylinder drives on O. the Verfahrgeschwindigkeit electrical cylinders is automatically from the operator in its fine fühligkeit adjustable, which e.g. offers a large advantage with different applications like Schlegelmulchen, cultivation, Mähen etc. The control was developed on IP 68 and vibration-resistant. By this again-developed & Easy drive electronic Geschwindigkeitsverstellung& it is to be accomplished also untrained operators possible an accurate and exact treatment of the surfaces. With the speed adjustment over turning grasp the operator can work more joint-carefully. Thus also the work quality improves and increases this control becomes into our 2-Rad-Traktor, & Mountain talent BT2& in three different engine variants 13.5, 15.5 and 18 HP available is presented to also again-developed hydraulics. This 2-Rad-Traktor particularly for extreme Hanglagen developed, there the engine close at the oh center is attached and much clearance has and thus extreme Mähwinkel, as well as an ideal weight distribution reaches. Both wheels are moving in opposite directions propelled by the Turnaround Aktivlenkung. So one can turn with minimum space requirement on the place. The underground is not damaged by the tire drive.

If it goes around comfortable working in particularly difficult to maintaining area as into ditches, at embankments and tendencies or into vineyards and fruit plantations, the new move-portable engine scythe STIHL FR 480 C-F proves as optimal solution. Thus the professional Geländespezialistin does not only convince with impressive achievement for a fast working progress, but also by a particularly comfortable and forces careful handling of itself talk make the STIHL FR 480 C-F by their starting comfort of the new generation, because them are at all equipped with the STIHL electrical start as the first engine scythe. Owing to this innovative technology it can be started completely without energy expenditure. That means: simply only refuel, PUR-towards and by push of a button at the multi-function grasp start. Thus the equipment is comfortably started, after it was already geschultert. In addition it does not have to be set off with short interruptions of work occasionally no more to starting. The starter battery is charged automatically during the enterprise of the engine scythe, so that the STIHL FR is always operational 480 C-F. Their enormous achievement strength for efficient Mäharbeiten, cutting of intractable Gestrüpp and clearing out work owes the STIHL FR 480 C-F to strong 2.2 KW two-stroke engine. The flexible connection between engine and shank provides with restrained conditions for freedom of movement and facilitates the Mähen uphill. To the high working comfort also the ergonomically arranged stretcher rack with integrated, padded lap belt contributes.

The company Weber represents the products of grumble Truck Minidumper, SnowEx salt scatterer, SweepEx of turning systems and ScandiCurb sliding form manufacturers in the German-speaking countries since August 2006 among other things.
& If we the demo park 2007 with the DemoPark& 2009 compares has we within the range inquiries an increase of nearly 6 & %. It was to be seen beautiful that it no break-downs in the numbers of visitors or with the exhibitors gab& .
& I am few weeks ago on the SED fair in Corby, England gewesen& , so Gerd Weber, „ there were 60% less exhibitor and 60% less visitor \ ". In addition, my impression in England was, which the remaining exhibitors very little trouble in the presentation of their products gave themselves.
The demo park was untenable the act axle on that the visitors staufrei& up to the motorway departure journeys could, and then for the few kilometers from motorway departure to the fairground 2 to 3 hours needed. The customers were as her on the fairground arrived understandably strongly made nervous and one can only hope that them the risk so which to experience, in 2011 once again for itself take.
To improve one would know also the food supply situation – none would like for a small sausage over 30 minutes of queue to stand. Otherwise the concept of the exhibition is correct.
As result one can say: & Obvious we and our customers are not so far from the economic crisis yet betroffen& .

With the two E-Premium-models tractors exhibit John Deere for the first time in-integrated system for the production and distribution of high electrical achievement (20kW). In the E-Premium tractor is available additionally to conventional electrical Bordnetzein further utility system with higher tension. For this-necessary electricity is produced by means of one of the engine directly propelling crankshaft generator and supplied then to a static frequency changer unit. The energy is meeting demand distributed from this to the individual consumers. The crankshaft generator supplies the electrical drive power for otherwise usually-mechanically the Nebenaggregate propelled directly by the engine (fan drive, climatic and compressed air compressor).
This kind of the drive leads to a clear efficiency improvement and thus a fuel saving. Already with low engine speeds e.g. becomes. Compressed air very briskly made available and a high cooling performance obtains. Beyond that the generator feeds 12 V/300AHochleistungsbordnetz and makes available at two plug sockets 230V and/or 400V for that operatingcommercial Elektrogeräteund of tools. Beyond that make possible-making possible those manually activatable reversing function of the exhaust a comfortable cleaning the radiator grille. This auxiliary use makes the new E-Premium-tractors of the 7030er 2 interesting - for series made of Mannheim for the employment also outside of the agriculture, e.g. in that industry, in road construction and within the local range.
With the employment of this new propulsion technology fuel can be saved, to before all up to 5%, if the tractor runs in the partial load range. In addition acceleration transport operations on the road and at the power-takeoff in the field operation is improved clearly. The E-Premium of models will be able to make additional IPM available achievement further opposite the Premium models up to 10PS, with which these get a maximum achievement of 200 HP (7430 E-Premium) and/or 211 HP (7530 E-Premium).
Further IPM is made possible for the auxiliary service with these models up to an engine speed by 1250 rpm aktivund thereby a still better use. Also those air conditioning system works still better, because their enterprise engine speed-takes place independently of. Altogether the E-concept makes thus a more efficient however also-higher performance tractor possible.

Loud & Bobcat, are the Tiltrotatoren an important development in the industry, since compact excavators are regarded increasingly as load-bearing devices and are not only inserted to the ditch of holes. The employment of a Tiltrotators in connection with the suitable attachment offers flexible and economical solutions for various work, which is not implemented normally with an excavator. In addition Bobcat introduces new line of attachments, which are meant specifically for the use with the Tiltrotator. In addition two ditch clearing spoons, two standard backacter dipper, a cold milling, a ripper and a hydraulic Steingreifer belong.
Except that the attachments reciprocally over for each 40° can be tilted, the TR05 Tiltrotator makes the rotation possible of the equipment in or against the clockwise direction around 360°. All functions of the Tiltrotators are operated simultaneously and proportionally via the Joysticks in the cab.
The assembly of the attachment at the Tiltrotator is made by the integrated, hydraulic quick change system S40. By two switches in the cab, operated at the same time, the driver can change non-hydraulic attachments at the Tiltrotator, without leaving its seat.

With the new cultivation Schrubbdeck (option) the application type of the machine were extended again clearly. In combination with water the Schrubbdeck ensures by means of rotary brushes for the fact that city centers, multi-storey car parks, underground parkings or market places in a completely new light light up. The Schrubbdeck with work width of 1,330 mm is equipped with three brushes
Depending upon case of application different brushes are available. A brush change is fast and toolless possible over the Hako click system. The brushes adapt due to their suspension of each unevenness and ensure in connection with the variable contact pressure adjustment perfect of results of cleaning with each underground.